14
Remote Controller—Continued
For detailed information, see the pages in parentheses.
a On/Standby button (39)
Sets the AV receiver to On or Standby.
b Remote Mode/Input Selector buttons (54,
124–130)
Selects the remote controller modes and the input
sources.
c Multi CH button (55)
Selects the multichannel DVD input.
d Macro buttons (132)
Used with the Macro function.
e Arrow [q]/[w]/[e]/[r] and Enter buttons
Used to select and adjust settings.
f Setup button
Used to change settings.
g Listening Mode buttons (79)
Used to select the listening modes.
h Dimmer button (55)
Adjusts the display brightness.
i Display button (55)
Displays information about the current input source.
j Muting button (56)
Mutes or unmutes the AV receiver.
k VOL [q]/[w] button (54)
Adjusts the volume of the AV receiver regardless of
the currently selected remote controller mode.
l Return button
Returns to the previous display when changing set-
tings.
m Audio button (100)
Used to change audio settings.
When the “Audio TV Out” setting is set to “On”
(page 110), this button is disabled.
n Sleep button (56)
Used with the Sleep function.
* SPA/B is not used in this AV receiver.
■ Controlling the tuner
To control the AV receiver’s tuner, press the [Tuner] (or
[Receiver]) button.
You can select AM or FM by pressing the [Tuner] button
repeatedly.
1 Arrow [q]/[w] buttons
Used to tune into radio stations.
2 Number buttons (57)
Used to select radio stations directly.
3 D.TUN button (57)
Selects the Direct tuning mode.
4 Display button (63, 73)
Displays information about the band, frequency,
preset number, and so on.
5 CH +/– button (58)
Used to select radio presets.
Note:
An Onkyo cassette recorder connected via u can also
be controlled in Receiver mode (see page 130).
Controlling the AV Receiver
To control the AV receiver, press the [Receiver] but-
ton to select Receiver mode.
You can also use the remote controller to control your
DVD player, CD player, and other components.
See page 122 for more details.
1
bl
bm
5
bn
bo
9
4
2
3
4
5
6
*
1
3
7
8
2
bk