130
Controlling Other Components—Continued
By pressing the Remote Mode button that’s been pro-
grammed with the remote control code for your cassette
recorder, you can control your cassette recorder with the
following buttons.
The [Tape] button is preprogrammed with the remote
control code for controlling an Onkyo cassette recorder
when used with an u connection.
For details on entering a remote control code for a differ-
ent component, see page 122.
On twin cassette decks, only Deck B can be controlled.
a On/Standby button
Turns the cassette recorder on or off.
b Previous and Next [7]/[6] buttons
The Previous [7] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [6] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [7]/[6] buttons may not work prop-
erly with some cassette tapes.
c Rewind and Fast Forward [5]/[4]
buttons
The Rewind [5] button starts rewind. The Fast
Forward [4] button starts fast forward.
d Reverse Play [t] button
Starts reverse playback.
e Play [1] button
Starts playback.
f Muting button (56)
Mutes or unmutes the AV receiver.
g VOL [q]/[w] button (54)
Adjusts the volume of the AV receiver.
h Stop [2] button
Stops playback.
Note:
An Onkyo cassette recorder connected via u can also
be controlled in Receiver mode.
Controlling a Cassette Recorder
1
6
7
8
2
3
4
5
* With some components, certain buttons may not work as
expected, and some may not work at all.
Press the appropriate Remote
Mode button first
To Next Page
Loading...
Need help?
General
