Advanced Settings (Setup Menu)
En-45
Setting Item Default Value Setting Details
DTS/DTS-ES/
DTS-HD
DTS Neural:X
(before
updating to a
version that
supports DTS:X
audio:
Straight
Decode
)
Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats� Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source�
● Input signals are played as they are input if
you select "Straight Decode"�
Other Multich Source Dolby Surround Set the listening mode for playing DVD-Audio
that are input from HDMI IN jack�
● Input signals are played as they are input if
you select "Straight Decode"�
● Available listening modes vary depending on speaker configuration and the input signal�
● Setting "Last Valid" will always select the last selected mode�
● Only "Analog" can be set to the "TUNER" input�
● "Digital" and "TrueHD" can be set to the "NET" input�
6� Hardware
Tuner
Setting Item Default Value Setting Details
AM/FM Frequency
Step (North American
models)
10kHz/0�2MHz Select a frequency step depending on your
area of residence�
Select "10kHz/0�2MHz" or "9kHz/0�05MHz"�
● When this setting is changed, all radio
presets are deleted�
AM Frequency Step
(Australian models)
9kHz Select a frequency step depending on your
area of residence�
Select "10kHz" or "9kHz"�
● When this setting is changed, all radio
presets are deleted�
To Next Page
Loading...
