Intek H-520 PLUS - Frequency Band Selection and Restrictions; Programming Frequency Bands; National Use Restrictions

Frequency Bands Selection / Programming
- 13 -
English
Frequency Band Selection / Programming
The radio must be programmed and used exclusively on the frequency band allowed by the regulations of the country
where the radio will be used. In order to program the frequency band, please refer to the following instructions :
1. Turn OFF radio.
2. Press and keep pressed the MENU (7) key while switching ON radio, by turning the OFF/VOL (3) control
clockwise.
3. The current programmed frequency band ID code (S) appears on the LCD.
4. Using the UP (9) or DN (10) keys, select a new frequency band ID code.
5. Shortly press the MENU (7) key to confirm and store.
Table of Restrictions on the Use of CB Transceivers (page I)
The following information are to be considered only just as an indication. They are believed to be correct at the time of
printing this operating manual. It is however the user’s responsibility to check that, in the country where radio is used, the
regulations for the use of CB transceivers have not been modified. User is therefore suggested to contact the local
dealer or local authority, in order to check the current regulations for the use of CB transceivers, before operating this
product. The manufacturer does not take any responsibility if the product is used in violation of the regulations of the
country where the product is used.
Addendum (Updated information on national restrictions)
BELGIUM, UK, SPAIN, SWITZERLAND
In order to use this transceiver in Belgium, UK, Spain and Switzerland, residence must have an individual licence. Users
coming from abroad may freely use the radio in FM mode, while in order to use it in AM mode they must hold a licence
released in their own country.
ITALY
Foreigners arriving in Italy must get an Italian authorization.
AUSTRIA
Austria does not allow using multi standard programmable CB radios. It is recommended to carefully follow this
directives and not to use the product in the Austrian territory.
GERMANY
Along some border areas in Germany, the radio can not be used as a base station from channel 41 to channel 80. Refer
to local authority (notification office) for details.