Intek M-100 PLUS - User Manual

MULTI STANDARD PROGRAMMABLE
27 MHz CB MOBILE TRANSCEIVER
M-100 PLUS
OWNER'S MANUAL
MANUALE DI ISTRUZIONI

Summary

Declaration of Conformity

Content of the Packaging

Controls, Indicators and Operation

Front Panel Controls Overview

Details of front panel buttons (A/F, ANL, EMG) and the LCD display.

LCD Display and Channel Selection

Explanation of LCD icons (AM, FM, HI, LO, ALPHA) and operation of UP/DN channel keys.

Operational Controls and Rear Panel

Adjustment of squelch/volume, microphone connector, and description of rear panel connectors.

Microphone Interface

Functionality of the Push-to-Talk (PTT) key and the microphone plug connection.

Installation

Main Unit and Power Installation

Steps for installing the main unit, connecting power cable, and fuse replacement.

Mobile Antenna Installation

Procedure for installing the mobile antenna, its parts, and connection to the radio.

Frequency Bands and Programming

Frequency Bands Table

Overview of programmable frequency bands, specifications, and country compliance.

Frequency Band Selection Procedure

Step-by-step guide to program the radio's frequency band and operating modes.

Technical Specifications

National Use Restrictions

PCB Layout Diagrams

Schematic Diagrams

Block Diagram

Intek M-100 PLUS Specifications

General Specifications

channels	40 FM
frequency range	27 MHz Citizen Band
frequency control	P.L.L.

Operating Environment

operative temperature	-10°/+55°C
DC input voltage	13.2Vdc ±15%

Receiver Specifications

system	Double conversion, CPU controlled super-heterodine
IF frequencies	1° 10.695 MHz / 2° 455 KHz
sensitivity	0.5uV for 20dB SINAD (FM)
audio output	2.5W
audio distortion	<8% at 1 KHz

Transmitter Specifications

system	CPU controlled P.L.L. synthesizer
maximum RF power	4W at 13.2Vdc
modulation	AM, FM
impedance	50 ohm unbalanced

Weight and Dimensions

size	100 (L) x 37 (H) x 180 (D) mm
weight	690 gr.