7
8
66/66
JP2
JP11
1
2
JP10
JP2
7
8
1
2
AUTO
JP11
1
2
JP10
1
2
66/100
JP2
7
8
1
2
JP11
1
2
JP10
JP2
100/100
7
8
1
2
JP11
1
2
JP10
JP11
1
2
JP10 JP11
1
2
JP10
JP2
100/133
7
8
1
2
JP2
133/100
7
8
1
2
JP2
133/133
7
8
1
2
JP11
1
2
JP10
2. Keyboard Power On Function Setting (3-pin): JP9
This allows you to disable the keyboard power on function. Set the jumper to
enabled or disabled if you wish to use your keyboard (by pressing < >) to
power on your computer. This feature requires an ATX power supply that can
supply at least 300mA on the +5VSB lead. The default is set to disable.
Ke
board Powr On Function
2-3 closed Enabled
JP9
1 3
JP9
1 3
1-2 closed Disabled
3. CMOS RAM Clear (3-pin): JP6
A battery must be used to retain the motherboard configuration in CMOS RAM
short 2-3 pins of JP6 to store the CMOS data.
Note: You can clear CMOS by shorting 1-2 pin, while the system is off. Then
return to 2-3 pin position. Avoid clearing the CMOS while the system is
on, it will damage the motherboard always unplug the power cord from
the wall socket.
CMOS RAM Clear Setting
2-3 closed Normal
(default)
JP6
1
3
JP6
1
3
1-2 closed Clear CMOS
To Next Page
Loading...
