Intel
®
945G Express Chipset GMCH Thermal Design Guide
Enabled Suppliers
Appendix A Enabled Suppliers
The following table lists enabled suppliers for the Intel
®
945G Express Chipset GMCH reference
thermal solution.
Table 6 1U Intel Reference Heat Sink Enabled Suppliers
Component Supplier Intel Part
Number
Vendor Part
Number
Contact Information
1U copper
heat sink,
gasket, and
pre-applied
Honeywell*
PCM45F TIM
Cooler
Master*
N/A ECB-00265-01-GP Wendy Lin (USA)
(510)770-8566 ext. 211
wendy@coolermaster.com
Thermal
Interface
Material
Honeywell* N/A PCM45F Paula Knoll
858-279-2956
Paula_knoll@honeywell.com
CCI/ACK* N/A Harry Lin (USA)
714-739-5797
hlinack@aol.com
Monica Chih (Taiwan)
866-2-29952666, x131
Monica_chih@ccic.com.tw
Heat Sink
Attach Clip
Foxconn*
A69230-001
N/A Bob Hall (USA)
503-693-3509, x235
bhall@foxconn.com
Solder-down
Anchor
Foxconn A13494-005 N/A Julia Jiang (USA)
408-919-6178
juliaj@foxconn.com
Note: These vendors and devices are listed by Intel as a convenience to Intel’s general customer base,
but Intel does not make any representations or warranties whatsoever regarding quality, reliability,
functionality, or compatibility of these devices. This list and/or these devices may be subject to
change without notice.
Order #308643 19
To Next Page
Loading...
