Intel Celeron 1047UE/847 User Manual

35
Onboard LAN1 Device/ Onboard LAN2 Device
Use this item to enable or disable the PCI Express LAN port in the chipset.
The optional settings are: [Disabled]; [Enabled].
Azalia
The optional settings are: [Disabled]; [Enabled];[Auto].
Azalia Internal HDMI Codec
Use this item to enable or disable internal HDMI codec for Azalia.
The optional settings are: [Disabled]; [Enabled].
Restore AC Power Loss
Use this item to select AC power state when power is re-applied after a power
failure.
The optional settings are: [Power Off]; [Power On]; [Last State].
► System Agent (SA) Configuration
Press [Enter] to make settings for the following sub-items:
► Graphics Configuration
Press [Enter] to make further settings for Graphics Configuration.
Graphics Configuration
GTT Size
The optional settings are: [1MB]; [2MB].
Aperture Size
The optional settings are: [128MB]; [256MB]; [512MB].
DVMT Pre-Allocated
Use this item to select DVMT 5.0 pre-allocated (fixed) graphics memory size used
by the internal graphics device.
The optional settings are: [32M]; [64M]; [128M]; [256M]; [512M]; [1024M].
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [128M]; [256M]; [MAX].

Intel Celeron 1047UE/847 Specifications

General

Brand	Intel
Model	Celeron 1047UE/847
Category	Motherboard
Language	English