Intel D2550MUD2 Product Guide

Intel Desktop Board D2550MUD2 Product Guide
32
Installing a PCI Express Mini Card
You can install a PCI Express Full-Mini Card or a PCI Express Half-Mini Card in the
Desktop Board’s PCI Express Mini Card slot.
To install a Full-Mini Card, see Figure 10 and follow these steps:
1. Observe the precautions in "Before You Begin" on page 25.
2. Insert the card into the PCI Express Mini Card connector (Figure 10, A) at a slightly
upward angle.
3. Align the card’s mounting holes over the board’s steel mounting posts (Figure 10,
B) and attach the card with the supplied screws.
To install a Half-Mini Card, follow these steps:
1. Observe the precautions in "Before You Begin" on page 25.
2. Install the mounting posts in the mounting holes as shown in Figure 10, C.
3. Insert the card into the PCI Express Mini Card connector (Figure 10, D) at a slightly
upward angle.
4. Align the card’s mounting holes over the board’s steel mounting posts (Figure 10,
E) and attach the card with the supplied screws

Intel D2550MUD2 Specifications

General

Brand	Intel
Model	D2550MUD2
Category	Motherboard
Language	English