Desktop Board Features
11
Main Memory
The board has four 2.5 V memory module sockets that support RIMMs containing Direct Rambus
DRAM (RDRAM) devices.
The board supports the following memory features:
• Maximum of 32 DRAM devices per channel
• 128 MB (minimum) to 2 GB (maximum) onboard capacity utilizing 256 Mbit or 512 Mbit
technology
• Single- or double-sided RIMM modules
• PC600 or PC800 compliant RDRAM
• Serial Presence Detect (SPD) memory only
✏
NOTE
For information about vendors that support these memory requirements, refer to the D850GB link
on this Intel web site:
http://support.intel.com/support/motherboards/desktop/
For information about installing memory, see Chapter 2.
To Next Page
Loading...
