Intel D945PLRN Product Guide

Intel Desktop Board D945PLRN Product Guide
14
Main Memory
NOTE
To be fully compliant with all applicable Intel
®
SDRAM memory specifications, the board should
be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your
memory modules do not support SPD, you will see a notification to this effect on the screen at
power up. The BIOS will attempt to configure the memory controller for normal operation.
The desktop board supports dual or single channel memory configurations defined in
Table 4.
Table 4. Desktop Board D945PLRN Memory Configurations
Memory Speed FSB Frequency (MHz) Memory Speed (MHz)
800 533 DDR2 533
533 533
800 400 DDR2 400
533 400
• Two 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Modules (DIMMs)
connectors with gold plated contacts
• Unbuffered, non-registered single or double-sided DIMMs
• Serial Presence Detect (SPD) memory only
• Non-ECC RAM
• 1.8 V memory
• Memory configuration up to 2.0 GB utilizing 1 Gb technology
Related Links:
Go to the following links or pages for more information about:
• The latest list of tested memory,
http://support.intel.com/support/motherboards/desktop/
• SDRAM specifications,
http://www.intel.com/technology/memory/
• Installing memory, page
32 in Chapter 2

Intel D945PLRN Specifications

General

Brand	Intel
Model	D945PLRN
Category	Motherboard
Language	English