Intel I350-T4 User Manual

Hardware Installation
Attaching the Low Profile Bracket (Optional)
Some adapter models come with a small bracket in the product package, to be used in a low profile slot. If you
need to install the adapter in a low-profile slot, follow these instructions.
1. Before handling the adapter, ground yourself to dissipate any static charge.
2. Remove the two screws securing the standard bracket to the back side of the adapter.
3. Slide the bracket away from the adapter.

Intel I350-T4 Specifications

General

Data Rate Per Port	1 Gbps
Controller	Intel I350
Supported Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature	0°C to 55°C
Teaming Support	Yes
Quality of Service (QoS)	Yes
Wake-on-LAN (WoL)	Yes
Product Name	Intel I350-T4
Category	Network Adapters
Ports	4
Bus Type	PCI Express 2.1
Form Factor	Low Profile
Power Consumption	4.4 W
Operating Systems Supported	Windows, Linux, FreeBSD
Jumbo Frames	Up to 9.5 KB
Virtualization Support	Yes