Intel I350-T4 User Manual

System Requirements
l Any Intel® PRO/100, Intel® Gigabit Network Adapter, or Intel® 10GbE Network Adapter
l related driver software
l a supported Microsoft* Windows* operating system. Please refer to the System Requirements page
for a list of supported operating systems.
The Intel Network Adapters WMI Provider supports all Intel PRO/100, Gigabit, and 10GbE network adapters.
Installation
The Intel Network Adapters WMI Provider are installed as part of Intel® PROSet for Windows Device
Manager software installation. See the Installing Intel PROSet for Windows Device Manager section for more
information on how to install Intel PROSet for Windows Device Manager.
Intel PROSet for Windows Device Manager Typical Setup Type registers the Intel Network Adapters WMI
Provider into the root\IntelNCS2 namespace.
Supported Standards
The Intel Network Adapters WMI Provider supports the standards-based CIM 2.6 specification.
Known Issues
DMI-SNMP Instrumentation
This Intel Network Adapters WMI Provider cannot jointly operate with the Intel® DMI-SNMP instrumentation.

Intel I350-T4 Specifications

General

Data Rate Per Port	1 Gbps
Controller	Intel I350
Supported Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Operating Temperature	0°C to 55°C
Teaming Support	Yes
Quality of Service (QoS)	Yes
Wake-on-LAN (WoL)	Yes
Product Name	Intel I350-T4
Category	Network Adapters
Ports	4
Bus Type	PCI Express 2.1
Form Factor	Low Profile
Power Consumption	4.4 W
Operating Systems Supported	Windows, Linux, FreeBSD
Jumbo Frames	Up to 9.5 KB
Virtualization Support	Yes