Intel Motherboard Raptor AT - On-Board Ethernet; ATX Power Supply Enhancements

Chapter 1: Pre-Configuration
7
Table 1-7 Watchdog Address Selection
Watchdog
Address
JP6
1-2
JP6
2-3
110h* Closed Open
310h Open Closed
* Manufacturer's Settings.
On-board Ethernet
The Raptor AT has a built-in 10/100 Ethernet. The jumper JP12 either
disables (2-3) or enables (1-2) this feature. For more information please
refer to Appendix E.
Table 1-8 Ethernet Selection
Ethernet
Selection
Enabled Disabled
JP12 1-2* 2-3
* Manufacturer's Settings.
ATX Power Supply Enhancements
The Raptor AT has a Power on mode selection. The jumper JP4 selects
the power on mode.
Table 1-9 POWER ON Mode Select
Power on
mode
Power on
immediately
Power on upon
PWR_SW signal
(Button press)
JP4 1-2* 2-3
* Manufacturer's Settings.