Raptor AT – Installation Guide
24
SDRAM Precharge Control
The settings for this option are: All, Miss (default) and Miss/All.
Power Down SDRAM
The settings for this option are: Enabled and Disabled (default).
ACPI Control Register
The settings for this option are: Enabled and Disabled (default).
Gated Clock
The settings for this option are: Enabled (default) and Disabled.
Graphics Aperture Size
The settings for this option are: 4, 8, 16, 32, 64 (default), 128
and 256.
Search for MDA Resources
N/A.
8 bit I/O Recovery Time
The settings are Disabled (default), 1, 2, 3, 4, 5, 6 and 8 Sysclk.
16bit I/O Recovery Time
The settings are Disabled (default), 4, 1, 2 and 3 Sysclk.
PIIX4 SERR#
The settings for this option are: Enabled and Disabled (default).
USB Passive Release
The settings for this option are: Enabled (default) and Disabled.
To Next Page
Loading...
