Intel NUC7i3BNH User Manual

Intel NUC Kit NUC7i7BNH, NUC7i5BNH & NUC7i3BNH User Guide
4
2. Remove the standoff from the 42mm position (B).
3. Align the small notch at the bottom edge of the M.2 card with the key in the connector.
4. Insert the bottom edge of the M.2 card into the connector (C).
5. Secure the card to the standoff with the small silver screw (D).
If you are installing a 42mm M.2 SSD:
1. Remove the small silver screw from the metal standoff on the motherboard (A).
2. Align the small notch at the bottom edge of the M.2 card with the key in the connector.
3. Insert the bottom edge of the M.2 card into the connector (B).
4. Secure the card to the standoff with the small silver screw (C).
Installing and Removing Memory
Intel NUC Kits NUC7i3BNH and NUC7i5BNH have two DDR4 SO-DIMM sockets. Memory requirements:
• 1.2V memory

Intel NUC7i3BNH Specifications

General

Processor	Intel Core i3-7100U
Processor Cores	2
Processor Threads	4
Processor Base Frequency	2.4 GHz
Graphics	Intel HD Graphics 620
Graphics Base Frequency	300 MHz
Graphics Max Dynamic Frequency	1.0 GHz
Max Memory Size	32 GB
Number of Memory Slots	2
Storage Interface	SATA 6.0 Gb/s
SATA Ports	1
Ethernet	10/100/1000 Mbps
Dimensions	115 x 111 x 51 mm
Operating System Support	Windows 10, Linux
Processor Cache	3 MB
Memory Type	DDR4-2133
M.2 Slot	M.2 22x42/80
USB Ports	4 x USB 3.0
HDMI Ports	1
Audio	3.5mm Headphone/Microphone Jack
Power Supply	65W external power adapter
Thunderbolt Ports	1 (USB-C Thunderbolt 3)