38
2.2.3.1 Internal USB 3.0 Header (1.25 mm Pitch)
Figure 9 is a connection diagram for internal USB .30 header.
NOTE
• The +5 V DC power on the USB header is fused.
• Use only an internal USB connector that conforms to the USB 3.0 specification for high-speed
USB devices.
Figure 9. USB 3.0 Internal Header (1.25 mm Pitch)
NOTE
Connector is Molex part number 5041871874, 1.25 mm pitch header, surface mount, vertical.
To Next Page
Loading...
Need help?
General
