Technical Reference
49
2.6 Environmental
Table 17 lists the environmental specifications for the kit.
Table 17. Environmental Specifications
Parameter Specification
Non-Operating -40 °C to +60 °C
°
°
The operating temperature of the kit may be determined by measuring the air temperature
from the junction of the heatsink fins and fan, next to the attachment screw, in a closed
chassis, while the system is in operation.
50 g trapezoidal waveform
Velocity change of 170 inches/s²
Velocity Change (inches/s²)
21-40 30 152
Unpackaged 5 Hz to 20 Hz: 0.01 g² Hz sloping up to 0.02 g² Hz
20 Hz to 500 Hz: 0.02 g² Hz (flat)
5 Hz to 40 Hz: 0.015 g² Hz (flat)
40 Hz to 500 Hz: 0.015 g² Hz sloping down to 0.00015 g² Hz
Note: Before attempting to operate this kit, the overall temperature of the kit must be above the minimum operating
temperature specified. It is recommended that the kit temperature be at least room temperature before
attempting to power on the kit. The operating and non-operating environment must avoid condensing humidity.
To Next Page
Loading...
Need help?
General
