- 20 -
Guest Configuration Screen
This page shows the configuration options for the connected guest computers.
1. Configuration Guest
Option “separate network for each client (automatic)”
If this option is activated, GuestGate randomly assigns different networks to each
connected guest computer. This option should be activated if you want to prevent
guest computers from seeing and accessing each other (Layer 3 Client Isolation = on).
It is activated by default.
Option “same network for all clients (automatic)”
GuestGate automatically assigns IP addresses to the guest computers. All guest
computers operate in the same network (Layer 3 Client Isolation = off).
Option “same network for all clients (enter manually)”
If this option is enabled, you can manually define the network for the connected guest
computers (Layer 3 Client Isolation = off).
To Next Page
Loading...
