Intellinet GUESTGATE MK II User Manual

- 22 -
Bandwidth Upload Limit
Bandwidth control for the upload speed (sending files to the Internet), with options the
same as above.
Trusted Ethernet Addresses
If you wish to permanently authenticate a guest computer, you can add its MAC
address to GuestGate’s configuration. GuestGate will not show the welcome page to
any computer that has been entered here.
Enter the MAC address of the computer as shown above. The syntax is
xx:xx:xx:xx:xx:xx. Click “Add Address” to save the MAC address. Repeat these steps
for additional MAC addresses. In order to delete a MAC address from the
configuration, select the entry from the drop-down list and click on “Remove.”
You can obtain the MAC address of a connected computer from the GuestGate Status
screen, or you can perform the following steps (example: Windows
2000/XP/Vista/Windows 7): At the DOS Command prompt type: ipconfig/all and
press Enter.
Example Output:
The “Physical Address” is the MAC address that needs to be entered in the
configuration of GuestGate.
The format is: xx:xx:xx:xx:xx:xx (not xx-xx-xx-xx-xx-xx).

Intellinet GUESTGATE MK II Specifications

General

Brand	Intellinet
Model	GUESTGATE MK II
Category	Gateway
Language	English