IP PnP
In many situations, it is necessary for the network administrator to change the
TCP/IP settings of guest computers because the existing settings are not compatible
or your network has advanced requirements. GuestGate eliminates this step
completely. GuestGate automatically adjusts to the guest computer’s TCP/IP
settings, providing a true zero guest configuration.
Bandwidth Control
GuestGate controls how much of your Internet connection speed is dedicated
to the guest network. Upload and download bandwidth can be configured
individually.
True Layer 3 Virtual VLAN Function
In a public location with a public wireless access point, there are often concerns
about security. GuestGate not only protects the host network from unauthorized
access by your guests, it takes security one step further. When the “separate
network for each client” option is activated, no guest computer can access any
other guest computer. In this mode, GuestGate randomly assigns each guest
computer its own network. This option is activated by default.
Packet Filter
Block access to certain Web sites or entire IP ranges.
4-Port 10/100 Auto-Sensing LAN Switch
GuestGate provides four 10/100 Mbps LAN switch ports for the connection
of PCs, notebooks, or other switches or wireless access points.
Web-Based Administrator Interface
The configuration is fully Web-browser based. For security reasons, the Web
administrator menu is only accessible from the host network.
Firmware Updates via Web Browser
Quickly and conveniently upgrade firmware of your GuestGate HotSpot
Gateway from INTELLINET NETWORK SOLUTIONS with the Web browser of
your choice.
4
INTRODUCTION
To Next Page
Loading...
Need help?
General
