To Next Page

To Previous Page

Network Information: Basic information about the host network interface.

Various Information: Display of the current ﬁrmware version, the system’s

uptime and the status of the password-protected Internet access.

Connected Guest Computers: GuestGate shows all of the connected guest

computers, including the MAC address, the assigned IP address and the

connection time. Click on “[Details]” to view individual statistics for each connected

PC, including the bandwidth consumed (Mbytes).

Guest confIGuratIon screen

This page shows the conﬁguration options for the connected guest computers.

Conﬁguration Guest

Option “separate network for each client (automatic)”: This operational mode

is called “Virtual VLAN.” If this option is activated, GuestGate randomly assigns

different networks to each connected guest computer. This option should be

activated if you want to prevent guest computers from seeing and accessing

each other (Virtual VLAN = on). It is activated by default.

Option “same network for all clients (automatic)”: GuestGate automatically

assigns IP addresses to the guest computers. All guest computers operate in the

same network (Virtual VLAN = off).

Option “same network for all clients (enter manually)”: If this option is

enabled, you can manually deﬁne the network for the connected guest

computers (Virtual VLAN = off).

CONFIGURATION OPTIONS

Intellinet GuestGate User Manual

Questions and Answers: