Intellinet GuestGate - Host Configuration Screen Details; Configuring Host Network Settings (DHCP;Static); Restricting Administrator Access by IP; Packet Filtering and Address Blocking

16
16
host confIGuratIon screen
This page shows the configuration options for the host interface of GuestGate.
Configuration Host
Option “DHCP”: GuestGate automatically receives the IP address, netmask,
gateway and DNS server information from the DHCP server in your network,
typically a router. This is the default and recommended setting.
Option “static”: In larger networks, a manual configuration of the IP settings
may be necessary. Select “static” and enter the IP address, netmask, gateway
IP address and DNS server IP addresses manually.
Multiple DNS servers can be entered by separating them with a space; e.g.,
111.222.333.444 999.888.777.666.
Administrator IP Address: Restrict access to GuestGate’s administration menu to
the IP address you enter in this field. This can be any local or public IP address.
Packet Filter
Blocked Ports: If you wish to block certain IP addresses, domain names or an
entire network, you can enter this here.
“Add Host Address” is used to enter domain names such as guestgate.com or
intellinet-network.com.
CONFIGURATION OPTIONS