MIC LINE MIXER
3
LM-6414
Features
Features
- MULTIPLE INPUTS AND OUTPUTS
Fourteen channel inputs including six mono and four stereo channels to accommodate a wide array of sound
sources including microphones, instruments and CD players. Four channel outputs plus stereo output for complete
routing flexibility.
- THREE-BAND EQ
Three-band equalization on all input channels for maximum control of audio mix.
- FULL-FEATURED INPUT CHANNELS
Trim control, peak indicators and constant-level pan controls on each channel.
- INPUT AND OUTPUT MONITORING
PFL function on input channels for convenient headphone monitoring, plus switches for selectable output
monitoring.
- LED OUTPUT DISPLAY
Output display is switchable between four output busses, stereo bus, PFL or monitor level.
- ON-BOARD PHANTOM POWER
Built-in +48VDC phantom power for condenser microphones
- AC/DC OPERATION
Operates on AC or DC power for true portability.
- ACCESSORIES
One detachable AC power cord is provided for use with this product.
Operation
Operation
Make certain that speakers and input sources are properly connected before switching on.
Keep volume levels at minimum gain before switching on.
※NOTE:The system’s operation is delayed by approximately three seconds after pressing the AC Mains power
switch. This is due to the built-in protection circuitry, designed to protect speakers and other system components.
To Next Page
Loading...
Need help?
General
