Need help?Do you have a question about the Inter-m CA-8320 and is the answer not in the manual?
Specifies conditions to avoid for optimal product performance and service life.
Details critical safety instructions for operating the equipment.
Outlines basic operational procedures and considerations before switching on the unit.
Lists the main functionalities and specifications of the CA-8320 powered mixer.
Explains EQ, Monitor, Effect, and Pan controls for individual input channels.
Describes the digital reverb selection, DSP activation, and effects output level adjustment.
Controls the signal level from Tape In jacks to the Main L/R buss.
Controls the signal level from Aux In jacks to the Main L/R buss.
Adjusts gain for specific frequency bands in the monitor output.
Controls reverb return level and the overall monitor buss output level.
Adjusts gain for specific frequency bands in the main L/R output.
Controls reverb return level and the overall main L/R output level.
Selects stereo or bridged mono mode and indicates power status.
Manages phantom power for microphones and indicates signal clipping.
Explains high-Z and low-Z inputs, phantom power, and wiring conventions for channels 1-6.
Details MIC and LINE inputs for channels 7 & 8, and their nominal levels.
Describes EFX output, foot switch jack, and various external output connections.
Covers speaker connection types, impedance, and output power for main and monitor.
Details the function of the unit's main power switch and associated indicator.
Illustrates approved speaker connection diagrams for main and bridged outputs.
Shows how to connect microphones, instruments, effects processors, and speakers to the mixer.
Step-by-step guide for connecting audio sources and setting initial input levels.
Instructions on selecting, activating, and adjusting the digital reverb effect.
Example setup for a conference PA system, including connections and power amp mode.
Illustrates connecting mics, instruments, speakers, and external effects for a band.
Guides on creating independent monitor mixes and using external effects with the unit.
A visual representation of the internal signal processing and audio path of the mixer.
Details rated output power, frequency response, and THD specifications.
Lists input sensitivity, impedance, hum, noise, crosstalk, and buss noise figures.
Provides mains power source, consumption, weight, and physical dimensions.
Specifies conditions to avoid for optimal product performance and service life.
Details critical safety instructions for operating the equipment.
Outlines basic operational procedures and considerations before switching on the unit.
Lists the main functionalities and specifications of the CA-8320 powered mixer.
Explains EQ, Monitor, Effect, and Pan controls for individual input channels.
Describes the digital reverb selection, DSP activation, and effects output level adjustment.
Controls the signal level from Tape In jacks to the Main L/R buss.
Controls the signal level from Aux In jacks to the Main L/R buss.
Adjusts gain for specific frequency bands in the monitor output.
Controls reverb return level and the overall monitor buss output level.
Adjusts gain for specific frequency bands in the main L/R output.
Controls reverb return level and the overall main L/R output level.
Selects stereo or bridged mono mode and indicates power status.
Manages phantom power for microphones and indicates signal clipping.
Explains high-Z and low-Z inputs, phantom power, and wiring conventions for channels 1-6.
Details MIC and LINE inputs for channels 7 & 8, and their nominal levels.
Describes EFX output, foot switch jack, and various external output connections.
Covers speaker connection types, impedance, and output power for main and monitor.
Details the function of the unit's main power switch and associated indicator.
Illustrates approved speaker connection diagrams for main and bridged outputs.
Shows how to connect microphones, instruments, effects processors, and speakers to the mixer.
Step-by-step guide for connecting audio sources and setting initial input levels.
Instructions on selecting, activating, and adjusting the digital reverb effect.
Example setup for a conference PA system, including connections and power amp mode.
Illustrates connecting mics, instruments, speakers, and external effects for a band.
Guides on creating independent monitor mixes and using external effects with the unit.
A visual representation of the internal signal processing and audio path of the mixer.
Details rated output power, frequency response, and THD specifications.
Lists input sensitivity, impedance, hum, noise, crosstalk, and buss noise figures.
Provides mains power source, consumption, weight, and physical dimensions.
General| Channels | 8 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Output Impedance | 4Ω |
| USB Interface | No |
| Power Source | AC 50/60Hz |
| EQ | 3-Band EQ (High, Mid, Low) |
| Phantom Power | Yes |
To Next Page
