PROFESSIONAL AUDIO MIXER
15
MX-1646D
④ Press the ENCODER switch to select the effector.
⑤ If you don’t select any effector for a certain time after turning the ENCODER switch, it returns to the
previously selected effector number.
⑥ Use the EFFECTOR MIX button to apply your desired effect to the MIX, G1, G2, and G3, G4 outputs.
⑦ User the EFFECTOR OUTPUT VOLUME to adjust the volume of effector output.
[Table 2: Types of Digital Effectors]
3. How to Select Digital Audio
① You can mix the PC AUDIO signal to the STEREO 3 channel by
pressing the PC AUDIO ON/OFF switch.
② You can mix the SD/USB playback signal to the STEREO 4 channel
by pressing the SD/USB ON/OFF switch.
③ Select the SD/USB selection switch to select your desired memory to
use during playing/recording.
④ Use the SD/USB VOL to adjust the SD/USB playback output level.
No. Program Function
01 Small hall Reverb Effect, Small hall (1.5 sec)
02 Big hall Reverb Effect, Big hall (2.8 sec)
03 Room Reverb Effect, Room (1.8 sec)
04 Church Reverb Effect, Church (7 sec)
05 Reverse Reverse Reverb Effect (1.2 sec)
06 Gated Gated Reverb Effect (0.8 sec)
07 Chapel Reverb Effect, Chapel (3 sec)
08 Spring Reverb Effect, Spring (2 sec)
09 Phaser Phaser Effect
10 Flanger Flanger Effect
11 Echo Echo Effect
12 Chorus Chorus Effect
13 Early Reflection Early Reflection Effect
14 Big Ambience Big Ambience Effect
15 Stereo Delay Stereo Delay Effect
16 Slap-back Delay Slap-back Delay Effect
To Next Page
Loading...
Need help?
General
