Inter-Tel GLX - System Features; System Attendant; Flexible Incoming Ring Assignment; Flexible Night Ringing Arrangement

SYSTEM FEATURES
System features include the following:
l System Attendant
l Flexible Incoming Ring Assignment (Alternate Point Answering)
l Flexible Night Ringing Arrangement (Night Ring Mode)
l Dual-Tone Multi-Frequency (DTMF) Signalling
l Music-On-Hold and Background Music
0 Call Privacy
0 C.O. Line Restriction
l Toll Restriction
SYSTEM ATTENDANT
The system has one attendant and intercom number 10 is assigned
to that keyset.
A quick reference user guide for attendant fea-
tures is included in the center fold of this manual. The atten-
dant has the following capabilities:
l Responds to
"0" as an intercom number.
l Receives attendant recalls.
l Is used to place the system in night ring mode.
l Is used for system feature programming.
l Is used for programming system speed-dial numbers.
FLEXIBLE INCOMING RING ASSIGNMENT (ALTERNATE POINT ANSWERING)
C.O. lines can be programmed to directly ring in on any or all
keysets, including the attendant's keyset. Regardless of the
programming, when an outside call rings in, the associated line
key flashes on all keysets and any user may answer the call.
FLEXIBLE NIGHT RINGING ARRANGEMENT (NIGHT RING MODE)
C.O.
lines that are programmed to ring in at the attendant's
keyset can also be programmed to ring in at alternate keysets
while the system is in night ring mode. C.O. lines that are not
programmed to ring in at the attendant's keyset are not affected
by night ring mode and continue to ring in as programmed.
To place the system in night ring mode (from attendant's keyset):
(1) Lift the handset and press the SYS HOLD key.
(2) Press the asterisk (*) key and hang up. The SYS HOLD key
flashes slowly.
To cancel night ring mode (from the attendant's keyset): Lift
the handset, press the slow-flashing SYS HOLD key, and hang up.
The SYS HOLD key is unlit.
GLX Owner's Guide (Issue 1, 11/85)
Page 6