REYSET FEATURES
SPEAKERPHONE
Every keyset has an integrated (built-in) speakerphone that al-
lows handsfree operation on outside calls and handsfree answering
of intercom calls. The speakerphone is automatically activated
by incoming intercom calls or when a line key is pressed while
the keyset is on hook. The ON/OFF key is used to transfer the
voice path between the handset and the speakerphone and to hang
up from handsfree calls.
There are two keyset programming options that can affect the
speakerphone. Option 2 disables the handsfree feature on incom-
ing intercom calls. Option 4 disables the feature that auto-
matically activates the speakerphone when a line key is pressed.
With either option enabled, the ON/OFF key is used to control the
speakerphone.
HEADSET CONNECTION AND OPERATION
Two types of $-conductor, modular headsets can be attached to the
keysets: headsets that have dynamic microphones or headsets with
carbon microphones that have an external AC power source. When
the headset is attached, the headset feature code (#04) must be
entered to enable it. The headset is activated when the keyset
user receives a handsfree intercom call, presses the ON/OFF key,
or presses a line key. The ON/OFF key is also used to disconnect
calls. The speakerphone cannot be used when a headset is enabled
(headset code #04 has been entered).
To connect a headset:
(1) Disconnect the handset by unplugging the handset cord from
the base of the keyset. Leave the handset in the cradle.
(2) Insert the headset plug into the vacant handset jack.
(3) While on hook, dial #04 to enable the headset feature.
To disconnect the headset:
(1) Reattach the handset.
(2) While on hook, dial #04 to disable the headset feature.
GLX Owner's Guide (Issue 1, 11/85) Page 14
To Next Page
Loading...
