AA222 Additional Information Page 32
4.2.2.8 Pause
Within a protocol it is possible to implement a Pause. This can be used as a break in between tests or to give
an instruction to the clinician before continuing with or ending a protocol.
By rotating the wheel, you can select and change the following settings.
Auto run. When enabled, the pause will automatically be part of the protocol. And the test will be
paused with the pause is reached in the protocol.
While selecting this instruction, press the button to open a pop-up in which you can change
the instruction that is shown at the start of the measurement. Connect a pc keyboard to the USB port
of the AA222 for easy typing options, including the use of special characters.
To Next Page
Loading...
