Interacoustics AC40 - Custom Max Output Adjustment

AC40 Service Manual Page 62
Custom max.
If the speakers / amplifier setup is not powerful enough to stimulate with the predefined maximum output, the
maximum output can be decreased to fit the current configuration.
To use custom max, follow instructions on screen or below, read carefully before start. (Figure 36)
When custom max is not used the check mark (use custom max. values) has to be unchecked.
Figure 36
Select speaker.(Figure 37)
Select frequencies
Adjust slider until speaker is distorting or the slider is at the highest.1.
Notices max output level on the Sound level meter (SLM).2.
Type value from the SLM.3.
Select next freq.
Figure 37
2
1
3