INTERFACE MODEL 9840 VER 6.0.2
@123R1000000
Acknowledge:
@123 Reset – Tare A
Example 2:
@123R0111000
Acknowledge 2:
@123 Reset – Peak A Valley A Tare B
Freeze Display Command (X)
In Run Mode, the freeze display command will freeze and unfreeze the run mode
numerical display and the values sent from the unit for RS232 output using either the
remote Value or Print command. Send the command once to freeze the display and
output at the current value. Send again to return display and output to actual reading from
sensor.
Text Display Command (T)
This command allows you to put a line of text on the front panel display of the Model
9840. The format is T (text), where text is the message that you want to display. The
text is limited to the number of characters that can be shown on the front panel display.
Example:
@123TStress Test Ready
Acknowledge:
@123 Text Displayed - Stress Test Ready
MODEL 9840 PG 30 PUB. 2856-16
To Next Page
Loading...