Chapter 5: Menu reference
164 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Note: This operation is only possible on LCD keypads with integrated readers.
The keypad for card learning is defined in System Options. See “8.8.5 Card
learn-in” on page 255 for more details. If another keypad is defined as a keypad
for card learning, the learning keypad name is prompted, for example:
Removing a card
If the user has a card assigned, you can remove the assigned card. The following
screen appears.
Press Enter.
The card has been removed from the selected user.
3.1.n.4 RF fobs
This menu lets you see all fobs programmed for the selected user, select an
existing fob, or create a new one.
The menu contents are similar to the 4 Zones and areas > 4.4 RF fobs menu
described on page 191.
3.1.n.5 Language
The Advisor Advanced system can display menus in the preferred language of
each user.
The language is switched after user authorization.
Contact your supplier to get more information about available languages.
3.1.n.6 User groups
Use the User groups menu to assign user groups to the selected user. A user
can have up to 8 user groups assigned. User groups define the options and
areas available for users.
To change a user group assignment, select the appropriate slot.
To Next Page
Loading...
Need help?
General
