Chapter 5: Menu reference
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 229
Choose Ok and press Enter. This removes the time frame.
Repeat the command to delete other time frames, or press Clear to exit and
return to the higher menu level.
7.2.n.5 Action list
Select actions that must be performed by the system according to the selected
schedule.
Each action can be programmed with a number of options. Before going any
further, select the action to program.
The maximum action number for each schedule is given in “General features” on
page 36.
7.2.n.5.0 Add action
Access the menu to add an action. If the action is created successfully, the
following message appears:
The new action is given the default name “Action N” and placed on the end of the
action list. You can now start editing the action details for the new action.
7.2.n.5.m Select action
Select an action to program.
7.2.n.5.m.1 Action name
Every action can be programmed with a name to identify it.
Use the Action name screen to enter or edit the action name. The action name
can contain up to 16 characters.
7.2.n.5.m.2 Object type
7.2.n.5.m.3 Function
7.2.n.5.m.4 Parameters
Available functions and parameters are described in “User programmable
functions” on page 88.
To Next Page
Loading...
Need help?
General
