Desktop Camera
To mount the desktop camera on a magnetic surface:
Place the base of the camera on a magnetic surface to hold the
camera in place.
WARNING: Magnetic fields can erase data on a credit card and
cause damage to cell phones and hard drives.
To mount the desktop camera on a wall or ceiling:
1. Drill the screw holes according to the drill template.
2. Disassemble the three-axis bracket. Hold the base (2) with
one hand, and rotate the pole (1) counter-clockwise to
disassemble the pole from the base.
3. Mount the fixed tray (item 3 in step 2) to the ceiling or wall with
the supplied screws.
12 P/N 1073278-EN • REV A • ISS 09MAY17 © 2017 United Technologies Corporation. All rights reserved.
To Next Page
Loading...
