Camera's default IP address: 192.168.2.70
User Name: admin
Password: 1234
Note: A pop-up may appear asking for an immediate
password change. We strongly recommend changing the
password. Select OK in this dialog and any subsequent
dialogs that may appear.
6. Click or tap the Configuration tab.
Note: A pop-up may appear prompting for plug-in installation.
Follow the installation prompts to install the plug-in.
7. Select Network and then select Wi-Fi on the left menu.
8. Click or tap Search.
9. Click or tap on the Wi-Fi network to be used for the camera in
the Wireless List.
10. Type the Wi-Fi network passphrase in the Key 1 field.
11. Scroll down and click or tap the Save button on the bottom of
the screen.
Note: Do not select Connect in the WPS Section.
12. Repeat steps 9-11 above to add any additional cameras.
13.Connect the setup device to the wireless network selected in
step 9.
Network connection via Wi-Fi is now complete!
3. Reboot cameras
1. Launch the TruVision
®
IP camera configuration browser.
16 P/N 1073278-EN • REV A • ISS 09MAY17 © 2017 United Technologies Corporation. All rights reserved.
To Next Page
Loading...
