Quick setup
Note: If the light source where the camera is installed
experiences rapid, wide variations in lighting, the camera may not
operate as intended.
To quickly put the camera into operation:
1. Mount the camera. (See “Mounting” on page 10)
2. Connect the camera to a local network via Wi-Fi. (See “Add
cameras to a Wi-Fi network” on page 15)
3. Reboot the camera.
1. Setting up Ethernet/Wi-Fi transmission
Wi-Fi transmission distance
The Wi-Fi transmission distance/range of the camera is
approximately 50 m (164 ft.) in open air applications.
Note: The transmission distance may vary due to the presence of
physical obstacles such as trees, walls, elevators, fire doors,
furniture, etc. Avoid very solid walls and metallic objects in the
transmission path.
Other Wi-Fi networks (for example Wi-Fi, WiMAX) operating on
2.4 GHz and certain types of devices (such as microwave ovens
or point-to-point Wi-Fi transmissions) can cause interference with
the network and a reduction in transmission distance/range.
Wi-Fi signal strength
Wi-Fi signal strength can be checked in the Wireless List in the
camera’s browser interface (see “Add cameras to a Wi-Fi
network” on page 15). Use the scale below to determine if actions
are needed to improve performance.
85+ – Excellent:
No additional actions needed and default video resolutions
settings may be increased if required.
To Next Page
Loading...
