TruVision 12/32 Series IP Camera Configuration Manual 27
Figure 10: Motion detection window
Defining a motion detection alarm requires the following tasks:
1. Area settings: Define the on-screen area that can trigger a motion detection alarm
and the detection sensitivity level (see Figure 10, item 1).
2. Arming schedule: Define the schedule during which the system detects motion
(see Figure 10, item 2).
3. Recording schedule: Define the schedule during which motion detection can be
recorded. See “Recording schedule” on page 50 for further information.
4. Linkage: Specify the method of response to the alarm (see Figure 10, item 3).
5. Normal and advanced configuration: Normal configuration allows you to set the
sensitivity level of the motion detection. Advanced configuration gives you much
more control over how motion is detected. It lets you set the sensitivity level as well
To Next Page
Loading...
