TruVision Series 3 IP Camera FW3.1 Configuration Manual 57
To define RTSP authentication:
1. Click Configuration > Storage > RTSP Authentication.
2. Under “RTSP Authentication”, select Enable or Disable in the drop-down list
to enable or disable the RTSP authentication.
3. Click Save to save the changes.
Note: If "RTSP Authentication" is disabled, the user can still see the live view
images although there is has no permission for “Remote: Live View".
IP address filter
This function makes access control possible.
Figure 16: IP address filter window
To define IP Address Filter:
1. Click Configuration > Security.
To Next Page
Loading...
