Interlogix TVW-5302 - Playing back recorded video

62 TruVision Series 3 IP Camera FW3.1 Configuration Manual
Live view mode
Once logged in, click “Live View” on the menu toolbar to access live view mode.
See Figure 1 on page 9 for the description of the interface.
Start/stop live view: You can stop and start live view by clicking the
Start/stop live view button on the bottom of the window.
Record: You can record live video and stored it in the directory you
have configured. In the live view window, click the Record button at the
bottom of the window. To stop recording, click the button again.
Take a snapshot: You can take a snapshot of a scene when in live
view. Simply click the Capture button located at the bottom of the
window to save an image. The image is in JPEG format. Snapshots are
saved on the hard drive.
Playing back recorded video
You can easily search and play back recorded video in the playback interface.
Note: You must configure NAS or insert the SD card in the dome camera to be
able to use the playback functions.
To search recorded video stored on the camera’s storage device for playback,
click Playback on the menu toolbar. The Playback window appears. See
Figure 18.