Intermatic ET2825C User Manual

Setting Astronomic On/Off Events
Access the Astro Events screen to congure Astronomic ON/OFF events for each individual circuit. For each circuit one Astronomic
ON event (at sunset) and/or one Astronomic OFF event (at sunup) can be enabled for selected days of the week. Follow this
procedure to set Astro ON/ OFF Events (if no astronomic events need to be set press MODE to move to the next mode selection).
1. Press MODE to advance until SET ASTRO ON/OFF EVENTS SUNSET icons appear on the display (if this selection is not
already active). The display also shows the ON@ icon and the LOAD icon above the circuit #1 button.
2. If an event is not set the time display will show - - - -.
3. Press DAY. The screen displays SUNSET and the days of the week.
If the desired days for this event
are
Then
MON-SUN Press ENTER/NEXT to save. Go to step 7.
MON-FRI Press DAY once and then press ENTER/NEXT to save. Go to step 7. .
SAT-SUN Press DAY twice and then press ENTER/NEXT to save. Go to step 7.
SET EACH DAY INDIVIDUALLY
On the display, the day of the week
being set is ashing.
Press DAY three times and the MON icon should ash.
Go to step 4.
4. Press – to eliminate this event or press + to keep this event for the selected day.
5. Press DAY to move to the next day of the week repeat step 4.
6. When all the days are set, press ENTER/NEXT to save.
7. The display changes to SET ASTRO ON/OFF EVENTS SUNUP, the OFF@ icon.
8. If an event is not set the display will show - - - - .
9. Press DAY. The screen displays SUNUP and the days of the week.
If the desired days for this event are Then
MON-SUN Press ENTER/NEXT to save. Go to step 13.
MON-FRI Press DAY once and then press ENTER/NEXT to save. Go to step 13.
SAT-SUN Press DAY twice and then press ENTER/NEXT to save. Go to step 13.
SET EACH DAY INDIVIDUALLY
On the display, the day of the week
being set is ashing.
Press DAY three times and the MON icon will ash.
Go to step 10.
10. Press – to eliminate this event or press + to keep this event for the selected day.
11. Press DAY to move to the next day of the week repeat step 10.
12. When all the days are set, press ENTER/NEXT to save.
13. The display shows the SET ASTRO ON/OFF EVENTS SUNSET icons. The display also shows the ON@ icon and the
LOAD icon above the next circuit button.
If Then
You want to congure an Astro event
for another circuit
Return to step 2.
All the required Astro events are set Press MODE to save and exit. The procedure is complete.

Intermatic ET2825C Specifications

General

Brand	Intermatic
Model	ET2825C
Category	Switch
Language	English