Intermec CK3 User Manual

CK3 Mobile Computer User’s Manual iii
Document Change Record
This page records changes to this document. The document was
originally released as Revision 001.
Version Number Date Description of Change
005 2/2011 Revised manual to correct the following
sections:
• “Connecting to a Bluetooth Scanner”
on page 35.
• “EA20X Extended Range Area Imager
Minimum Reading Distances” on
page 86.
• “Single Dock (AD20)” on page 94.
004 6/2010 Revised manual to add the EX25C imager
and update supported bar code symbologies.
003 10/2009 Revised manual to add the large 28-key
numeric keypad and the CK3NI model.
002 3/2009 Revised manual to support the new CK3a1
and CK3n1 models, and the DDIB 802.11
a/b/g radio module.

Intermec CK3 Specifications

General

RAM capacity	128 MB
Certification	GS, EN55022 Class B, ICES-003 Class B, EN 300.328, FCC Part 15.247, RSS-210, EMC, FCC Part 15, R&TTE, RoHS, WEEE, cULus
Product color	Gray
Internal memory	512 MB
Built-in display	Yes
Housing material	-
Display resolution	240 x 320 pixels
Display technology	TFT
Processor frequency	520 MHz
Bluetooth version	2.0+EDR
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Operating system installed	Windows Mobile 6
Type	Handheld bar code reader
Scanner type	1D/2D
Power source type	Battery
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	36 mm
Width	84 mm
Height	217 mm
Weight	453 g