Chapter 2 — Connecting and Configuring the CK3
36 CK3 Mobile Computer User’s Manual
To create a connection configuration label using EasySet
1 Download EasySet from the Intermec website at
www.intermec.com.
2 Click the Products tab.
3 Using the Products page, navigate to your product page. Click
Computers > Handheld Computers > CK3 > Downloads tab >
EasySet ver. 5.6.4.2.
4 Follow the instructions to download EasySet.
5 Open EasySet.
6 Select Interface > Bluetooth > Connect/disconnect > Compose
BT addess:. The Bluetooth - Connect/disconnect - Compose BT
addess screen appears.
7 Enter the BT address listed on the labels.
8 Click OK.
To connect to a Bluetooth scanner with a connection configuration
label
1 Make sure that the Bluetooth radio on your CK3 is enabled and
that your CK3 is visible and connectable.
2 Make sure that your Bluetooth scanner is on.
3 With your Bluetooth scanner, scan the Bluetooth EasySet
connection configuration label.
4 When prompted, enter the passcode for your scanner. The default
passcode for Intermec Bluetooth scanners is 0000.
5 Tap Finish.
To Next Page
Loading...
