Intermec CK30

10 CK30 Handheld Computer User’s Manual Addendum
Note: You can also use a MobileLAN access point with
software release 1.80 or later as an authentication server. For
help, see the MobileLAN access System Manual (P/N 067150)
or MobileLAN access WA2X System Manual (P/N 073915).
• An access point with an 802.11b/g radio
• A CK30 with an 802.11b/g radio and the 802.1x/WPA
security option
To enable 802.1x security on your CK30
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and
radio parameters on your CK30.
3 Press C and then B to open the System Main Menu.
4 Choose Configuration Utility > Communications > 802.11
Radio > Profile Settings.
5 For Association, choose Open and then press Enter.
6 For Encryption, choose WEP and then press Enter.
7 For Authentication, choose TTLS, PEAP, or TLS and then
press Enter.
If you choose TTLS or PEAP:
a Select User name, type your user name, and then press
Enter.
b Select Password prompt, choose Enter password now,
and then press Enter.
Note: You can use Prompt for password to troubleshoot
your connection to the network if you have problems.
c Select User Password, type a user password, and then
press Enter.
d For Validate Server Certificate, choose Enabled and press
Enter.