Intermec CK30

6 CK30 Handheld Computer User’s Manual Addendum
The type of security you choose is not dependent on your
authentication server. For example, you can use Funk security
with a Microsoft server.
To use Funk security, you need to:
• Select Funk security as your security choice
• Select a profile
• Set profile settings
• Download a certificate (if necessary)
Selecting Funk as Your Security Choice
The default security choice is Microsoft. If you want to use Funk
security, you need to select it as your security choice.
To select Funk security as your security choice
1 Press C and then B. The System Main Menu appears.
2 Select the Configuration Utility.
3 Select Communications > 802.11 Radio > Security Choice.
4 From the Security Choice dialog box, choose Funk Security.
An alert box appears asking if you want to warm boot now.
5 Press Enter. Your CK30 warm boots.
Selecting a Profile
You can define up to four profiles for your Funk Odyssey
security. Different profiles let your CK30 communicate in
different networks without having to change all of your security
settings. For example, you might want to set up one profile for
the manufacturing floor and one for the warehouse.
To select a profile
1 Press C and then B. The System Main Menu appears.
2 Select the Configuration Utility.
3 Select Communications > 802.11 Radio > Select Profile.
4 Select Active Profile and choose the profile you want to
name.