Intermec CK30

8 CK30 Handheld Computer User’s Manual Addendum
• CK30 with the 802.11b/g radio and the 802.1x/WPA
security option
To enable WPA security on your CK30
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and
radio parameters on your CK30.
3 Press C and then B to open the System Main Menu.
4 Choose Configuration Utility > Communications > 802.11
Radio > Profile Settings.
5 For Association, choose WPA and press Enter.
6 For Encryption, choose TKIP and press Enter.
7 For Authentication, choose TTLS, PEAP, or TLS and press
Enter.
If you choose TTLS or PEAP:
a Select User name, type your user name, and then press
Enter.
b Select Password prompt, choose Enter password now,
and then press Enter.
Note: You can use Prompt for password to troubleshoot
your connection to the network if you have problems.
c Select User Password, type a user password, and then
press Enter.
d For Validate Server Certificate, choose Enabled and press
Enter.
Note: You must have the date on the CK30 set correctly
when you enable Validate Server Certificate..
If you choose TLS:
a Load a user and root certificate on your CK30. For help,
see “Loading a Certificate” on page 13 for help.