Chapter 3 — Use the Phone
CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 37
5 In the Enter the Number to dial box, enter #777 and tap Next.
6 Enter your username: <10_digit_#>@vzw3g.com.
Where <10_digit_#> is your actual 10 digit phone number. For
example, 8005551212@vzw3g.com. To determine your phone
number, go to the phone application and tap Menu > Options.
7 Enter the password: vzw (case-sensitive).
8 Tap Finish.
You can test the data service by navigating to a website using
Internet Explorer.
Activate the UMTS Phone
Use a SIM card to activate the UMTS/HSPA phone on the CN50. You
can purchase the SIM card from your network provider. Insert the SIM
card in the battery cavity on the back of the CN50.
1 Press ^ to turn off the CN50.
2 Disconnect the handstrap from the top of the CN50.
3 Push forward on the battery release tab until the battery releases.
4 Lift the battery away from the CN50.
To Next Page
Loading...
