Chapter 3 — Use the Phone
38 CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual
5 Swing the card access door clockwise to expose the SIM card and
microSD card slots.
6 Insert the SIM card into the top slot until it clicks in place.
7 Close the card access door.
8 Insert the battery and press down until it clicks in place.
9 Reconnect the handstrap.
10 Press ^ to turn on the CN50.
Turn the Phone On and Off
Before you can start using your phone, you need to enable it. Use
Wireless Center to enable and disable your phone, as well Bluetooth
and Wi-Fi communications.
1 Tap Start > Settings > Connections > Wireless Center.
2 Tap Phone to turn on the Phone.
3 (Optional) To configure the phone, tap Menu in the tile bar at the
bottom of the screen.
4 Tap OK when you are done configuring the options.
5 Tap OK to close Wireless Center.
To Next Page
Loading...
