Enhanced Mobile Document Imaging (eMDI) User Guide 23
General Settings
allowChanges True or false Allows or restricts the user from making any
changes to the General Settings and hides the
General tab. Default is true.
Focus Check
allowChanges True or false Allows or restricts the user from changing the
Focus Check. Default is true.
focusCheck Off, medium,
high, or no value
Adjusts the focus level when you are capturing a
document image. If your document image is
blurry, set the Focus Check to a higher level to
prevent blurry images. Default is no value.
Image Area to Capture
Ratio
allowChanges True or false Allows or restricts the user from changing the
Image Area to Capture Ratio. Default is true.
imageRatio 10% to 85% The ratio of the edge of a document image to
the edge of the image frame before a document
image is captured. Default is no value.
Output Compression
allowChanges True or false Allows or restricts the user from changing the
Output Compression. Default is false.
fileFormat BMP, JPEG, or
TIFF
If no value is provided for this field, the
application does not change the File Format
setting. BMP corresponds to none, JPEG
corresponds to JPEG, TIFF, and TIFFG4
formats. Default is no value.
Compression Quality
allowChanges True or false Allows or restricts the user from changing the
Compression Quality. Default is false.
compressionQuality 0% to 100% Adjusts the compression quality of document
images that are saved as a .jpg or .tiff. The lower
the setting, the lower the file size. Adjust this
setting if you are running out of disk space on
your computer. Default is no value.
If you are saving your document images in
.bmp format, this setting is disabled.
Field Definitions for MobileDocumentImaging_Config.xml (continued)
Field Name Valid Values Description or Notes
To Next Page
Loading...
