Intermec CN51 - Page 26

26 Enhanced Mobile Document Imaging (eMDI) User Guide
folderMemoryLimit Unsigned integer
0 - xxx MB
The amount of storage space allowed for
images in the Image Location folder. Once the
limit is reached, a warning appears indicating
that you need to increase the memory limit or
delete older document images. Setting the
memory limit to 0 allows unlimited space.
Default is no value.
Captured Document
Location
allowChanges True or false Allows or restricts the user from changing the
Captured Image Location. Default is false.
capturedDocumentLocation File path Specify a file path where all document images
are saved. If no file path is specified, document
images are saved to \My Documents\MDI.
Default is no value.
File Name Template
allowChanges True or false Allows or restricts the user from changing the
File Name Template setting. Default is false.
nameTemplate Character string
up to 200
characters
$(num) increments a counter
$(num) is a timestamp
snapshotNameTemplate Character string
up to 200
characters
$(location) adds the last known GPS location
$(field#) adds a file indexing value, where #
corresponds to the indexing field
number
Advanced Settings
allowChanges True or false Allows or restricts the user from changing
Advanced settings. Default is true.
enableBarcodeDecodingOn
Exit
True or false Enables bar code decoding when you exit eMDI.
Default is true.
Note: When you capture document images, the
bar code decoding is turned off.
Brightness
allowChanges True or false Allows or restricts the user from changing the
Brightness setting.
Brightness -100 to 100 Adjusts the brightness when you are capturing
a document image in a darker environment.
Default is 0.
Field Definitions for MobileDocumentImaging_Config.xml (continued)
Field Name Valid Values Description or Notes