Intermec EasyCoder PD42 Installation Instructions

Using the Internal Rewinder for Batch Takeup Operation
In batch takeup operation, labels are wound up on the internal rewinder
instead of being peeled off at the tear bar. To be able to use the internal
rewinder for batch takeup, you need to also install the liner retention guide.
To install the liner retention guide
1 Remove the thumbscrew to remove the front cover.
2 Use the two remaining screws to attach the liner retention guide to the
print mechanism.

Intermec EasyCoder PD42 Specifications

General

Brand	Intermec
Model	EasyCoder PD42
Category	Printer
Language	English